Skip to main content

Department Research 2017

Visiting Professor

Kissock, J. K. (2017). Visiting professor at Dalian University of Technology in Liaoning, China.

Journal Articles

  • Ali, H., Murray, A. & Myszka, D. (2017). The synthesis of function generating mechanisms for periodic curves using large numbers of double-crank linkages. ASME Journal of Mechanisms and Robotics, 9(3), 1-8.
  • Bryson, D. & Rumpfkeil, M. (2017). All-at-once approach to multifidelity polynomial chaos expansion surrogate modeling. Aerospace Science and Technology, 70C, 121-136.
  • Hallinan, K. P. (2017). Developing a cost-optimal retrofit CHP system for multi-family buildings using historical demand. International Journal of Advanced Research, 5(8), 1786-1800.
  • Johnson, D. J., Niedbalski, N. P., Ervin, J. S. & Patnaik, S. S. (2017). A thermal management system using ammonium carbamate as an endothermic heat sink. Applied Thermal Engineering, 121, 897-907. Retrieved from https://doi.org/10.1016/j.applthermaleng.2017.04.126
  • Khamlaj, T. & Rumpfkeil, M. (2017). Theoretical analysis of shrouded horizontal axis wind turbines. Energies, 10(1), 38.
  • LaDuca, B., Ausdenmoore, A., Katz-Buonconintro, J. & Hallinan, K. P. (2017). An arts-based instructional model for student creativity in engineering design. J. of Engineering Pedagogy, 7(1), 34-57. Retrieved from http://icl-conference.org/dl/iJEP/iJEP_vol7_no1_2017_F.pdf
  • Mativo, J. & Hallinan, K. P. (2017). Development of compliant thermoelectric generators (TEGs) in aerospace applications using topology optimization. Energy Harvesting and Systems (EHS), 4(2).
  • Reinert, S. S., Kinney, A., Jackson, K., Diestelkamp, W. S. & Bigelow, K. E. (2017). Age stratification and sample entropy analysis enhance the limits of stability test for older adults. Journal of Applied Biomechanics, 33(6), 419-423.
  • Roland, J. & Rumpfkeil, M. (2017). Wing fuel tank heat sink calculation for conceptual aircraft design. Journal of Aircraft, 54(3), 1172-1188.
  • Rumpfkeil, M. & Beran, P. (2017). Construction of dynamic multi-fidelity locally optimized surrogate models. AIAA Journal, 55(9), 3169-3179. 
  • Rumpfkeil, M. P. ( 2017). Using steady flow analysis for noise predictions. Computers and Fluids,154C, 347-357. 
  • Sample, R. B., Kinney, A., Jackson, K., Diestelkamp, W. S. & Bigelow, K. E. (2017). Identification of key outcome measures when using the instrumented timed up and go and/or posturography for fall screening. Gait and Posture, 57, 168-171.
  • Tukur, A. & Hallinan, K. P. (2017). Statistically informed static pressure control in multiple-zone VAV systems. Energy and Buildings, 135, 244-252. Retrieved from dx.doi.org/10.1016/j.enbuild.2016.11.032

Papers Published in Conference Proceedings

  • Almestiri, S., Murray, A. & Myszka D. (August, 2017). Spherical linkages analysis and synthesis by special unitary matrices for solution via numerical algebraic geometry. ASME International Design Engineering Technical Conference.
  • Altman, A. & Gunasekaran, S. (2017). Refined Insight into the wingtip vortex-free shear layer interaction. AIAA Aerospace Sciences Meeting.
  • Altman, A. & Memon, O. (2017). PIV investigation into cross-stream behavior in wing wake free shear layers: Challenges and results. AIAA Aerospace Sciences Meeting.
  • Brown, W., Carlson, P. & Kashani, A. R. (2017). Strategies for mitigating floor vibration. Structural Engineers Association of California Convention, San Diego, CA.
  • Bryson, D. & Rumpfkeil, M. (2017). Comparison of unified and sequential-approximate approaches to multifidelity optimization. AIAA 2017-0131.
  • Bryson, D., Rumpfkeil, M. & Durscher, R. (2017). Framework for multifidelity aeroelastic vehicle design optimization. AIAA 2017-4322.
  • Choi, J.-K. (2017). A case study of sustainable manufacturing practice: end-of-life photovoltaic recycling. Sustainable Design and Manufacturing 2017.
  • Fthenakis, V., Zhang, Z. & Choi, J.-K. (2017). Cost optimization of decommissioning and recycling CdTe PV power plants. IEEE- PVSC.
  • LaDuca, B., Ausdenmoore, A., Katz-Buonconintro, J., Hallinan, K. P. & Marshall, K. (2017). Confidence in creativity: a journey to value, impact and transformative education. International Seminar on Integral Education, Ciudad.
  • Rumpfkeil, M., Hanazaki, K. & Beran, P. (2017). Construction of multi-fidelity locally optimized surrogate models for uncertainty quantification. AIAA 2017-1948.
  • Sagerman, D., Rumpfkeil, M., Hellman, B. & Dasque, N. (2017). Comparisons of measured and modeled aero-thermal distributions for complex hypersonic configurations. AIAA 2017-0264.

Technical Report

  • Niedbalski, N. P., S. P., Johnson, D. J. & Ervin, J. S. (2017). A thermal management system using ammonium carbamate as an endothermic heat sink. (AFRL-RQ-WP-TP-2017-0159, ed.). Air Force Report.

Invited Lectures

  • Bigelow, K. E. (2017, October). Applying engineering tools to clinical assessment, care, and monitoring of human movement. Presented at the National Telehealth Conference, Cincinnati, OH.
  • Hallinan, K. P. (2017, May). Arts habits and processes for promoting creativity in engineering education. Philadelphia, PA.
  • Hallinan, K. P. & LaDuca, B. (2017, April). Local sustainability with local jobs, training, and mentoring. Presented at the Community Engaged Research and Scholarship, University of Dayton, Dayton, OH.
  • Kissock, J. K. (2017, February). Principles of energy efficiency. Presented at the Ohio Energy Management Conference, Columbus, OH.
  • Kissock, J. K. (2017, July). Targeting energy efficient efforts using monthly energy use data. Presented at Dalian University of Technology, Dalian, China.
  • Kissock, J. K. (2017, October). University of Dayton Industrial Assessment Center & Ohio Lean Buildings Program. Presented at the Ohio EPA 2017 Sustainability Conference, Columbus, OH.  
  • Kissock, J. K. (2017, November). University of Dayton Industrial Assessment Center & Ohio Lean Buildings Program. Presented at the Industrial Energy Saving Workshop, DPL, Dayton, OH.
  • Kissock, J. K. (2017, November). Guide to sustainable manufacturing, energy efficiency assessment in industrial facilities: case studies and lessons seminar. Presented at ASHRAE Winter Conference, Las Vegas, NV.
  • Murray, A. (2017, March). Design with many (& sometimes too many) links. Presented at LIRMM, Montpellier, France.
  • Rumpfkeil, M. (2017, November). The potential of single- and multi-fidelity optimization tools. Presented at the AFRL Combustion Branch Seminar, WPAFB, Dayton, OH.
  • Rumpfkeil, M. (2017, June). CFD in undergraduate engineering education. Presented at the CFD Society of Canada Annual Conference, Windsor, Ontario.

Posters

  • Altman, A. & Memon, O. (2017, July). Cross-stream evolution of the free shear layer behind a wing. Presented at the 10th International Symposium on Turbulence and Shear Flow Phenomena, Chicago, IL.
  • Choi, J.-K. (2017). Elevating sustainability for engineering design. Presented at the Hanley Sustainability Institute Annual Meeting, Dayton, OH.
  • Gunasekaran, S. & Altman, A. (2017, July). Insight into wingtip vortex – wing wake free shear layer interaction. Presented at the 10th International Symposium on Turbulence and Shear Flow Phenomena, Chicago, IL.
  • Schuessler, R., Ising, M., Kelley, D., Choi, J.-K. & Kissock, J. K. (2017). Sustainable manufacturing for mid-sized manufacturers. Presented at the Graduate Student Showcase, Dayton, OH.

Presentations

  • Altman, A. (2017, June). Approved presentation to the subsonic aerodynamic testing association: Is anyone measuring absolute total pressure correctly? Presented at the Subsonic Aerodynamic Testing Association, Wichita, KS.
  • Altman, A. & Memon, O. (2017, March). PIV investigation into cross-stream behavior in wing wake free shear layers: Challenges and results. Presented at the DCASS, Sinclair Ponitz Center, Dayton, OH.
  • Altman, A. & Gunasekaran, S. (2017, March). Refined insight into the wingtip vortex - free shear layer interaction. Presented at the DCASS, Sinclair Ponitz Center, Dayton, OH.
  • Bigelow, K. E. (2017, August). The teaching repository as a tool for you. Presented at the American Society of Biomechanics Meeting, Boulder, CO.
  • Bigelow, K. E., Nowicki, K., Dues, B., Schepers, L., Jackson, K. & Reissman, M. (2017, February). Analyzing the use of visual feedback provided by limb mounted lasers for improving lower extremity movement in individuals with neurological disorders. Presented at the Midwest American Society of Biomechanics Meeting, Grand Rapids, MI.
  • Bigelow, K. E., Hollis, S., Clark, H., Ingram, P., Erlich, T., Hill, T. & Jackson, K. (2017, February). The influence of carbon composite and plastic ankle foot orthoses on balance, gait and fatigue in individuals with multiple sclerosis. Presented at the Midwest American Society of Biomechanics Meeting, Grand Rapids, MI.
  • Cronin, J., Roman, A., Ervin, J. S. & Byrd, L. (2017, April). Studies of two phase flow using electrical capacitance tomography and R-134a. WPAFB, Dayton, OH.
  • Hallinan, K. P. (2017, April). Local sustainability with local jobs, training, and mentoring. Presented at the Stander Presentation, Dayton, OH.
  • Kowalski, D., Memon, O. & Altman, A. (2017, March). Distributed lift: An unconventional approach. Presented at the DCASS, Sinclair Ponitz Center, Dayton, OH.
  • Qureshi, S. & Altman, A. (2017, October). Saving lives through aerial fire suppression: from aerodynamic breakup to a ground coverage predictability model. Presented at the Academic Research Colloquium.
  • Rumpfkeil, M. & Beran, P. (2017, March). Construction of multi-fidelity surrogate models for uncertainty quantification. Presented at the 42nd AIAA Dayton Cincinnati Aerospace Sciences Symposium (DCASS), Dayton, OH.

Workshop

  • Bigelow, K. E. & Bloemer, K. (2017, January). Beyond brainstorming. Presented at the Kern Entrepreneurship Engineering Network (KEEN) Winter Meeting, Jacksonville, FL.
  • Kissock, J. K. (2017, January). Energy efficient process cooling and HVAC and energy efficient compressed air. Presented at CLEAResult, Chicago, IL.
  • Kissock, J. K. (2017, April). Energy efficient water wastewater treatment. Presented at AEP Ohio, Bellaire, OH.
  • Kissock, J. K. (2017, April). Energy efficient HVAC and compressed air. Presented at AEP Ohio, Wooster, OH.
  • Kissock, J. K. (2017, April). Energy efficient HVAC and compressed air. Presented at AEP Ohio, Columbus, OH.
  • Kissock, J. K. (2017, June). Energy efficient process cooling and HVAC and energy efficient compressed air. Presented at CLEAResult, Oklahoma City, OK.
  • Kissock, J. K. (2017, November). Deep dive into process energy efficiency. Presented at AEP Ohio, Columbus, OH. 

Sponsored Research

  • Altman, A. & Altman, S. S. (2016 - 2018), Wind tunnel diagnostics and support. AFRL/RQVX, Federal, $534,266.00.
  • Altman, A. (2016 - 2017), Aeroelastic testing using rapid prototyping materials. DAGSI/AFRL, Federal, $63,831.00.
  • Altman, A. (2016 - 2017), Combustion enhancement in high-speed flows. DAGSI/AFRL, State, $59,219.00.
  • Bigelow, K. E., Jackson, K., Reissman, T. & Walsh-Messinger, J. (2017 - Present), Fostering increased independence and health outcomes for older adults: Development and adoption of a smartwalker. University of Dayton STEM Catalyst Program, University of Dayton, $33,079.99.
  • Bigelow, K. E. (2015 - Present), Enhancing undergraduate engineering education through meaningful assistive device design. National Science Foundation, Federal, $77,272.00.
  • Bigelow, K. E. (2012 - Present), Assistive device design - EGR 103 spring project. Kettering Health Network, Local, $2,868.00.
  • Bigelow, K. E. (2012 - Present), Assistive device design - kitchen devices for individuals with stroke. Kettering Health Network, Local, $9,759.00.
  • Bigelow, K. E. (2012 - Present), Assistive device design - vision therapy device. Kettering Health Network, Local, $7,372.00.
  • Bigelow, K. E. (2012 - Present), Assistive device design - iPad accessories. Kettering Health Network, Local, $2,705.00.
  • Bigelow, K. E. & Bistrek, L. (2011 - Present), Improving student spatial visualization skills to increase retention and GPA. Procter and Gamble Fund's Higher Education Grant, Private, $6,000.00.
  • Bigelow, K. E. & Bloemer, K. (2015 - 2017), Ideation techniques and the entrepreneurial mindset. 4.Kern Family Foundation – Kern Entrepreneurship Engineering Network (KEEN) Topical Grant, Private, $39,900.00.
  • Bigelow, K. E. (2017), Health monitoring of elite athletes and military personnel. University of Dayton Research Institute – Ball Aerospace Contract, Other, $41,000.00.
  • Chiasson, A. & Kissock, J. K. (2017-2018), Performing building energy assessments. Ohio Lean Buildings Program, state of Ohio, $107,500.00. 
  • Chiasson, A. & Kissock, J. K. (2017), Performing building energy assessments. Ohio Lean Buildings Program, state of Ohio, $100.000.00. 
  • Choi, J.-K. (2017 - Present), Business competition grant. Crotty Center for Entrepreneurial Leadership, Private, $7,500.00.
  • Choi, J.-K. & Ciric, A. (2016 - 2018), Phase II solar-thermal adsorption refrigerator (STAR). U.S. Environmental Protection Agency, Federal, $75,000.00.
  • Choi, J.-K. & Kissock, J. K. (2011 - 2017), University of Dayton Industrial Assessment Center. U.S. Department of Energy, Federal, $1,300,000.00.
  • Choi, J.-K. (2016 - 2017), Sustainability Goal Setting for the Dayton region. Hanley Sustainability Institute, University of Dayton, $19,750.00.
  • Choi, J.-K. (2017), Design for environment projects. CROWN Equipment Corporation, Private, $4,000.00.
  • Choi, J.-K. (2016 - 2017), KEEN winter conference travel grant. Kern Family Foundation, Private, $2,000.00.
  • Ciric, A. R. & Choi, J.-K. (2017 - 2018), “STAR: solar thermal adsorptive refrigeration”. UD STEM Catalyst Program, University of Dayton, $14,513.00.
  • Driskell, S. O. S., Pinnell, M. F., Smith, T. B. & Sableski, M. C. (2017 - 2020), Using engineering design to increase literacy and STEM interest among third graders. Engineering and Science Foundation of Dayton, University of Dayton, $122,562.00.
  • Ervin, J. S. (2016 - 2018), Thermal management of advanced aircraft new money added to FA8650-16- 2-2605. AFRL, Federal, $607,500.00.
  • Hallinan, K. P. (2017 - 2018), Energy GPA. University of Dayton Green Revolving Loan Fund, University of Dayton, $13,000.00.
  • Hallinan, K. P. (2017 - 2018), Machine learning for forecasting comfort and virtual storage of residences. Emerson Climate Technologies, Private, $44,799.00.
  • Hallinan, K. P. (2016 - 2017), ECT - Surrogate modeling based upon data mining for predicting refrigeration system performance for alternative refrigerants. Emerson Climate Technologies, Private, $20,667.00.
  • Hallinan, K. P. (2016 - 2017), ECT - ProAct data mining - Failure Analysis. Private, $20,667.00.
  • Hallinan, K. P. (2016 - 2017), Commercial kitchen project. Emerson Climate Technologies, Private, $20,667.00.
  • Hallinan, K. P. (2016 - 2017), Transactional control to achieve load sharing/balancing/shifting in light commercial buildings and residences with solar PV and battery storage. Dept. of Energy, Federal, $40,000.00.
  • Kallenberg, B. J. & Murray, A. P. (2017 - Present), Research grant for developing EGR351"By Design." Kern Entrepreneurial Engineering Network (KEEN), Private, $6,999.78.
  • Kinney, A. (2017), Investigating reverse total shoulder implant positioning. University of Dayton School of Engineering Summer Undergraduate Research Experience (S.U.R.E.) Program, University of Dayton, $5,000.00.
  • Kinney, A. (2017), Relationships between deficits in neuromuscular coordination and balance performance in individuals with multiple sclerosis. University of Dayton Research Council, University of Dayton, $6,500.00.
  • Kissock, J. K. (2016-2021), Performing industrial assessments at the University of Dayton Industrial Assessment Center. U.S. Department of Energy, Federal, $1,843,321.00. 
  • Murray, A.Myszka, D. (2012-2017), Variable-geometry dies for polymer extrusion. National Science Foundation, Federal, $313,830. 
  • Murray, A.Myszka, D. (2012-2017), Research experiences for undergraduates. National Science Foundation, Federal, $32,200.00.
  • Myszka, D. (2017-2018), Development of morphing aircraft wing structures. Air Force Research Laboratories, Private, $36,511.00. 
  • Myszka, D. (2015-2017), Simulation model of condensing unit performance. Emerson Climate Technologies, Private, $47,243.00.
  • Pinnell, M. F., Blust, R. P., Balster, E., Bigelow, K. E., Crosson, K. M., Schneider, S. J. & Kinnucan-Welsch, K. A. (2010 - Present), EEC-1009607 - engineering innovation and design for STEM teachers. NSF, Federal, $499,101.00.
  • Rumpfkeil, M. (2017 - 2018), Aerospace propulsion outreach program (APOP) 2018. AFRL/RZ, Federal, $14,000.00.
  • Rumpfkeil, M. (2017), AFRL subject matter expert. AFOSR, Federal, $18,032.00.
  • Rumpfkeil, M. (2016 - 2017), Aerospace propulsion outreach program (APOP) 2017. AFRL/RZ, Federal, $14,200.00. 
  • Rumpfkeil, M. (2017), Hypersonic TSP measurements and CFD modeling (2nd extension). Hypersonics branch at WPAFB, Federal, $8,072.00.
  • Walsh-Messinger, J., Bigelow, K. E., Jackson, K. & Reissman, T. (2017), Fostering increased independence and health outcomes for older adults: Development and adoption of a smartwalker. STEM Catalyst, University of Dayton, $33,080.00.
School of Engineering Faculty Activities
Pictured: The University of Dayton's state-of-the-art engineering facility, Kettering Labs.
Faculty Activities
CONTACT

Department of Mechanical and Aerospace Engineering, Dr. Jamie Ervin, Department Chair

Kettering Laboratories
300 College Park
Dayton, Ohio 45469 - 0238
937-229-2835
Email