See UD's plans to return to teaching, learning and research on campus this fall with measures in place to promote safety and lessen the risk of COVID-19 spread.

Skip to main content

Department Research 2017

Abstract

  • Falkowski, S. A., Diller, M. & Powers, S. (2017). Manufacturability of additive manufacturing. DFMA International Forum, Providence, RI. Retrieved from www.dfma.com/forum/index.html

Book

  • Untener, J. A. & Mott, R. L. (2017). Applied strength of materials. International version. CRC Press.

Book Review

  • Zalewski, D. (2017). The probability handbook and the probability workbook. (3rd ed., vol. 43). Quality Management Forum.

Journal Articles

  • Furterer, S., Schneider, K., Key, M. & Zhang, Y. (2017). A lean six sigma approach for improving utilization of walk-in tutors. Quality Approaches in Education, 8(2), 24-34.
  • Reilly, P., Pazour, J. & Schneider, K. (2017). Propagation of unit location uncertainty in dense storage seabasing environments. International Journal of Production Research, 55(19), 5435-5499. Retrieved from http://www.tandfonline.com/doi/full/10.1080/00207543.2017.1319582

Papers Published in Conference Proceedings

  • Aboujaoude, M. & Schneider, K. (2017). A decision support tool for scheduling food bank compliance audits. Industrial and Systems Engineering Research Conference, Pittsburgh, PA.
  • Cassady, R. & Schneider, K. (2017). An introduction to probability models in reliability and maintainability. Reliability and Maintainability Symposium, Orlando, FL. Retrieved from https://www.ieee.org/conferences_events/conferences/conferencedetails/index.html?Conf_ID=18796
  • Englehart, D., Zalewski, D. & Schneider, K. (2017). Improving fleet readiness utilizing the AIRSpeed continuous improvement strategy. Industrial and Systems Engineering Research Conference, Pittsburgh, PA.
  • Furterer, S. (2017). Enhancing higher level learning in an engineering management organizational behavior course. American Society for Engineering Education.
  • Furterer, S. (2017). Systems engineering educational strategies:  incorporating active learning with a healthcare case study. American Society for Engineering Education.
  • Furterer, S. (2017). Leadership’s guide for achieving sustainable lean six sigma program change in higher educational institutions. Fourth International Conference on Lean Six Sigma for Higher Education.
  • McLellan, D. & Schneider, K. (2017). Maintenance planning and spare parts provisioning for a small unmanned aerial system. Reliability and Maintainability Symposium, Orlando, FL.
  • Schneider, K. (2017). Engagement in practice: community engaged scholarship to address local food insecurity. ASEE Annual Conference & Exposition, Columbus, OH.
  • Zhang, Y., Schneider, K., Furterer, S. & Key, M. (2017). A lean six-sigma approach for improving utilization of walk-in tutors. A Fourth International Conference on Lean Six Sigma for Higher Education.

Invited Lecture

  • Schneider, K. (2017, April). Community-engaged scholarship to address local food insecurity. Presented at the Shared Expertise for Shared Solutions, Dayton, OH.

Posters

  • Diller, M. & Segalewitz, S. I. (2017, June). A sound introduction to engineering technology and product development. Presented at the 2017 ASEE National Conference, Columbus, OH.
  • Furterer, S. & Rectin, B. (2017, December). Strategic business process architecture models enable a process architecture reference model for healthcare. Presented at the Institute for Healthcare Improvement Conference, Orlando, FL.
  • Malipeddi, R. & Schneider, K. (2017, March). Web and mobile application development to meet the data needs of The Foodbank of Dayton. Presented at the SOCHE STEM Cyber Research Symposium, Dayton, OH.

Presentations

  • Aboujaoude, M. & Schneider, K. (2017, May). A decision support tool for scheduling food bank compliance audits. Presented at the Industrial and Systems Engineering Research Conference, Pittsburgh, PA.
  • Blust, R.P. (2017, October). Intersectionalities of the entrepreneurial mindset and democratic transformation. Presented at the Imagine America National Conference, Davis, CA. 
  • Englehart, D., Zalewski, D. & Schneider, K. (2017, May). improving fleet readiness utilizing the AIRSpeed continuous improvement strategy. Presented at the Industrial and Systems Engineering Research Conference, Pittsburgh, PA.
  • Falkowski, S. A., Diller, M. & Powers, S. (2017, June). Design for additive manufacturing for prototype manufacturing. Presented at the DFMA International Forum, Providence, RI.
  • Furterer, S. (2017, June). Enhancing higher level learning in an engineering management organizational behavior course. Presented at the American Society for Engineering Education Annual Conference, Columbus, OH. 
  • Furterer, S. (2017, June). Systems engineering educational strategies: incorporating active learning with a healthcare case study. Presented at the American Society for Engineering Education Annual Conference, Columbus, OH. 
  • Furterer, S. (2017, May). Leadership’s guide for achieving sustainable lean six sigma program change in higher educational institutions. Presented at the Lean Six Sigma in Higher Education Conference, West Lafayette, IN. 
  • Furterer, S. (2017, May). Leadership’s guide for achieving sustainable lean six sigma program change in higher educational institutions. Presented at the Institute of Industrial and Systems Engineering Annual Conference, Pittsburgh, PA. 
  • Furterer, S. (2017, May). Labor management standards development in healthcare: flaws and best practices. Presented at the Institute of Industrial and Systems Engineering Annual Conference, Pittsburgh, PA.
  • Furterer, S. & Green, J. (2017, May). Using a process map to create a process architecture. Presented at the American Society for Quality World Conference on Quality and Improvement, Charlotte, NC.
  • Furterer, S. (2017, March). Linking your business' core processes to process architecture and strategy. Presented at the Business Transformation & Operational Excellence World Summit, Orlando, FL.
  • Furterer, K. & Furterer, S. (2017, March). Closing intelligence gaps in national security through application of lean six sigma quality tools. Presented at the International Conference of Industry, Engineering and Management Systems, Cocoa Beach, FL.
  • Furterer, S. (2017, March). Enhancing leadership and engagement for diversity through development of a new engineering management course. Presented at the International Conference of Industry, Engineering and Management Systems, Cocoa Beach, FL.
  • Furterer, S. (2017, March). Engaging a diverse quality workforce through leadership & innovation. Presented at the ASQ Columbus Spring Conference, Columbus, OH. 
  • Key, M., Furterer, S. & Schneider, K. (2017, November). Interdisciplinary assessment and development of walk-in tutoring processes. Presented at the College Reading & Learning Association, Pittsburgh, PA. 
  • McLellan, D. & Schneider, K. (2017, January). Maintenance planning and spare parts provisioning for a small unmanned aerial system. Presented at the Reliability and Maintainability Symposium, Orlando, FL.
  • Penugonda, N. & Schneider, K. (2017, October). application development projects to improve operational efficiency at The Foodbank through an ETHOS semester of service program. Presented at the Cin-Day INFORMS Symposium, Dayton, OH. 
  • Schneider, K. (2017, June). Engagement in practice: community engaged scholarship to address local food insecurity. Presented at the ASEE Annual Conference & Exposition, Columbus, OH.
  • Untener, J. A. (2017, June). A multifaceted approach to a fluid power laboratory course. Presented at the ASEE National Conference, Columbus, OH. 
  • Wingfield, A. & Schneider, K. (2017, October). Risk analysis of Beaver water district onsite wastewater treatment systems. Presented at the Cin-Day INFORMS Symposium, Dayton, OH.
  • Zalewski, D. (2017, October). Getting started with R. Presented at the 2017 Fall Technical Symposium, Dayton, OH.
  • Zhang, Y., Schneider, K., Furterer, S. & Key, M. (2017, May). A lean six-sigma approach for improving utilization of walk-in tutors. Presented at the Lean Six Sigma in Higher Education Conference, West Lafayette, IN.

Workshop

  • Diller, M. & Falkowski, S. A. (2017, September). Geometric dimensioning & tolerancing. Presented at the FAST Talk - GD&T, UDRI River Campus .

Sponsored Research

  • Pinnell, M. F., Blust, R. P., Balster, E., Bigelow, K. E., Crosson, K. M., Schneider, S. J. & Kinnucan-Welsch, K. A. (2010 - Present), EEC-1009607 - Engineering innovation and design for STEM teachers. NSF, Federal, $499,101.00.
  • Edmonson, C. P. (2011 - Present), Simio software. Simio LLC, Private, $79,200.00.
  • Edmonson, C. (2016 - 2017), KEEN fellows grant. Kern Foundation, University of Dayton, $15,000.00.
  • Furterer, S. (2017 - 2018), OLR hiring lean six sigma project. University of Dayton, $9,918.00.
  • Furterer, S. (2017), KEEN Fellows cohort. University of Dayton.
  • Furterer, S. (2017), Federal grant seekers fellowship. University of Dayton.
  • Furterer, S. & Rectin, B. (2017), Summer undergraduate research experience program (S.U.R.E) - Building a healthcare reference process architecture. University of Dayton, $5,000.00.
  • Johnson, M. E., Sun, Y., McEwan, R. & Veliz-Cuba, A. (2016 - 2017), Optimizing sustainable agriculture practices to reduce pathogen transmission. The Hanley Sustainability Institute, University of Dayton, $25,000.00.
  • Schneider, K. (2017), On site wastewater treatment systems. Beaver Water Department/University of Arkansas, Local, $5,744.00.
  • Schneider, K. (2017), University of Dayton 2017 summer undergraduate research experience (SURE). School of Engineering, University of Dayton, $6,500.00. 
  • Schneider, K. (2017), Community engaged scholarship for addressing local food insecurity. Marianist Foundation Grant, University of Dayton, $760.00.
School of Engineering Faculty Activities
Pictured: The University of Dayton's state-of-the-art engineering facility, Kettering Labs.
Faculty Activities
CONTACT

Engineering Management, Systems and Technology, Dr. Sandy Furterer, Department Chair

Kettering Laboratories
300 College Park
Dayton, Ohio 45469 - 0249
937-229-4216
Email
CONNECT