Contact

Dr. J. Kelly Kissock

Chairperson
Phone: 937-229-2835
More
Aerospace engineering research.

Altman, Aaron

Journal articles

Kang, H., N. Genco, and A. Altman. 2013. Empirically derived biplane lift as a function of gap and stagger. AIAA Journal of Aircraft 50, no. 1: 292-298.

Papers published at conference proceedings

Altman, A., and S. Gunasekaran. 2013. Identification of aircraft by their unique turbulent wake signature: Progress with experimental validation. AIAA Aerospace Sciences Meeting AIAA 2013: 1120, January 7-10, in Grapevine, Texas.

Lego, Z., and A. Altman. 2013. Analysis of a variable camber wing during highly unsteady maneuvers. 31st AIAA Applied Aerodynamics Conference, AIAA 2013, 3053, June, in San Diego, California.

Presentations

Altman, A. 2013. Musings on vortex formation and shedding. DCASS, AIAA, Sinclair Ponitz Center, March 6, in Dayton, Ohio.

Altman, A. (Author Only), and S. Gunasekaran (Presenter & Author). 2013. Analysis of rapidly pitching wings using superposition of rotational circulation. DCASS, AIAA, Sinclair Ponitz Center, March 6, in Dayton, Ohio.

Altman, A. (Author Only), and S. Gunasekaran (Presenter & Author). 2013. Identification of aircraft by their unique turbulent wake signature: Progress with experimental validation. DCASS, AIAA, Sinclair Ponitz Center, March 6, in Dayton, Ohio.

Altman, A., and Z. Lego (Author Only). 2013. Analysis of a variable camber wing during highly unsteady maneuvers. DCASS, AIAA, Sinclair Ponitz Center, March 6, in Dayton, Ohio.

Gunasekaran, S. (Presenter & Author), and A. Altman (Author Only). 2013. Identification of any aircraft by its unique turbulence wake signature. 9th Annual Dayton Engineering Sciences Symposium (DESS), ASME/AIAA, Wright State University, October 29, in Dayton, Ohio.

Gunasekaran, S. (Presenter & Author), and A. Altman (Author Only). 2013. Wing performance insight from the self-preserved turbulent wake. 9th Annual Dayton Engineering Sciences Symposium (DESS), ASME/AIAA, Wright State University, October 29, in Dayton, Ohio.

Memon, O. (Presenter & Author), K. Wabick (Author Only), and A. Altman (Author Only). 2013. Wingtip vortices from an exergy-based perspective. 9th Annual Dayton Engineering Sciences Symposium (DESS), ASME/AIAA, Wright State University, October 29, in Dayton, Ohio.

Wabick, K. (Presenter & Author), A. Altman (Author Only), K. Granlund (Author Only), and M. OL (Author Only). Correction to classical lift curve slope at low-Reynolds number. DCASS, AIAA, Sinclair Ponitz Center, March 6, in Dayton, Ohio.

Wabick, K. (Presenter & Author), O. Memon (Author Only), and A. Altman (Author Only). 2013. Exergy variation in wingtip vortices as a function of angle of attack. DCASS, AIAA, Sinclair Ponitz Center, March 6, in Dayton, Ohio.

Contract, grant and sponsored research

Altman, A. (Co-Principal), and S.S. Altman (Co-Principal). Wind tunnel flow diagnostics and test support. AFRL/RQVX, Federal, $185,000.00. (October 2012 - October 2013).

Back to top from Altman, Aaron

Bigelow, Kimberly Edginton

Journal articles

Jackson, K., and K.E. Bigelow. 2013. Measures of balance performance are affected by a rested versus fatigued testing condition in people with multiple sclerosis. Physical Medicine and Rehabilitation 5, no. 11: 949-956.

Presentation

Bigelow, K.E. (Presenter & Author). 2013. Engineering innovation: First-year student reflections convey impact of externally sponsored assistive device design projects. 2013 American Society of Engineering Education North Central Conference, April 6, in Columbus, Ohio.

Bigelow, K.E. (Presenter & Author), and K. Jackson (Author Only). 2013. The effects of rest and fatigue on balance performance in persons with multiple sclerosis. 37th Annual Meeting of the American Society of Biomechanics, September 5, in Omaha, Nebraska.

Posters

Beach, R. (Presenter & Author), K. Jackson, and K.E. Bigelow. 2013. Effect of compliant flooring on postural stability in an older adult population. 37th Annual Meeting of the American Society of Biomechanics, September 5, in Omaha, Nebraska.

Jackson, K. (Presenter & Author), and K.E. Bigelow (Author Only). 2013. Measures of balance performance are affected by a rested versus fatigued condition in people with multiple sclerosis. 2013 Ohio Physical Therapy Association Fall Scientific Symposium, October 11, in Columbus, Ohio.

Petit, D.J. (Author Only), J. Barrios (Author Only), and K.E. Bigelow (Presenter & Author). 2013. Comparison of traditional and nonlinear gait analysis measures in individuals with multiple sclerosis. Gait and Clinical Movement Analysis Society, May, in Cincinnati, Ohio.

Smoot, S. (Presenter & Author), D. Kinor (Author Only), and K.E. Bigelow (Author Only). 2013. Pilot study of the effect of an acute vestibular therapy on vestibular therapy on postural stability of children with autism spectrum disorder and typically developing children. 37th Annual Meeting of the American Society of Biomechanics, September 5, in Omaha, Nebraska.

Magazine/trade publication

Jackson, K., and K.E. Bigelow. 2013. Kickboxing: A creative approach to improving balance in patients with MS. Lower Extremity Review (March).

Contract, grant and sponsored research

Bigelow, K.E. (Principal). Assistive device design - EGR 103 spring project, Kettering Health Network, Local, $2,868.00. (December 2012 - Present).

Bigelow, K.E. (Principal). Assistive device design - kitchen devices for individuals with stroke, Kettering Health Network, Local, $9,759.00. (September 2012 - Present).

Bigelow, K.E. (Principal). Assistive device design - vision therapy device, Kettering Health Network, Local, $7,372.00. (August 2012 - Present).

Bigelow, K.E. (Principal). Assistive device design - iPad accessories, Kettering Health Network, Local, $2,705.00. (January 31, 2012 - Present).

Bigelow, K.E. (Principal). Assistive device design - using the oven and microwave, Kettering Health Network and Neurorehab and Balance Center, $7,467.61. (November 2013 - May 2014).

Bigelow, K.E. (Principal). Assistive device design – spring engineering innovation project, Kettering Health Network and Neurorehab and Balance Center, Local, $4,831.43. (November 2013 - May 2014).

Bigelow, K.E. (Principal), R. Beach (Supporting), S. Smoot (Supporting), and S. Annas (Supporting). Biomechanical evaluation of Evenflo products, Evenflo Inc., Industrial, Local, $32,718.00. (May 2013 - September 2013).

Bigelow, K.E. (Principal). Changing mindsets: Framing design-for-the-disabled and other service-learning projects as entrepreneurial opportunities, Kern Family Foundation – Kern Entrepreneurship Engineering Network (KEEN) Private, $24,013.00. (May 2013 - June 2014).

Bigelow, K.E. (Supporting), and L. Bistrek. (Principal). Improving student spatial visualization skills to increase retention and GPA, Procter and Gamble Fund's Higher Education Grant, Private, $6,000.00. (December 2011 - Present).

Bigelow, K.E. (Co-Principal), M. Pinnell (Co-Principal), A. Ciric (Co-Principal), and L. Bistrek (Co-Principal). Engage: Engaging students in engineering, NSF ENGAGE Mini-Grant, Federal, $10,000.00. (August 2011 - January 2013).

Bigelow, K.E., and S. Smoot (Principal). Graduate student fellowship, National Science Foundation, Federal, $121,500.00. (August 2011 - August 2014).

Bigelow, K.E. (Co-Principal), and K. Jackson (Principal). The influence of a carbon fiber ankle foot orthoses (toe-off) on balance and gait in individuals with peripheral neuropathy, Allard USA Equipment Donation, $10,000.00. (January 2013 - December 2013).

Back to top from Bigelow, Kimberly Edginton

Choi, Jun-Ki

Journal article

Choi, J.-K. 2013. End-of-life management of c-Si photovoltaic module. Journal of the Korean Science and Engineering Association 41, no. 3: 31-32.

Choi, J.-K., and V. Fthenakis. 2013. Crystalline silicon photovoltaic recycling planning: Macro and micro perspectives. Journal of Cleaner Production 66: 443-449.

Ramani, K., D. Ramanujan, W. Berstein, J.-K. Choi, M. Koho, and F. Zhao. 2013. Prioritizing design for environment strategies using a stochastic multi criteria decision analysis. ASME Journal of Mechanical Design.

Paper published in conference proceedings

Choi, J.-K., J.K. Kissock, and K.P. Hallinan. 2013. Beyond industrial energy assessments: The life cycle design perspective. ACEEE Summer Study on Energy Efficiency in Industry, 4-1 to 4-11, in Niagara Falls, New York.

Invited lectures

Choi, J.-K. 2013. Integrated policy-energy-economy-environment-engineering (PE4) analysis. Renewable Energy Center Seminar, POSTECH, June 28, in Pohang, Korea.

Choi, J.-K. 2013. Integrated sustainable systems design. UD freshman seminar, Department of Mechanical and Aerospace Engineering, University of Dayton, April 5, in Dayton, Ohio. 

Presentation

Choi, J.-K. 2013. Photovoltaic recycling planning in the United States. 7th International Society for Industrial Ecology Biennial Conference, June 28, in Ulsan, Korea.

Choi, J.-K., and B.R. Bhavik. 2013. Assessing the effect of combined energy policies with an input-output framework. 21st International Symposium on Sustainable Systems and Technology, May 20, in Cincinnati, Ohio.

Choi, J.-K., K.P. Hallinan, and J.K. Kissock. 2013. Beyond industrial energy assessments: The life cycle design perspective. 10th Biennial Summer Study on Energy Efficiency in Industry, ACEEE, July 26, in Niagara Falls, New York.

Workshop

Choi, J.-K. 2013. NSF-SMART CN-Sustainable Manufacturing Roadmap Workshop, National Science Foundation, August 16, in Cincinnati, Ohio.

Choi, J.-K. 2013. Integrated sustainable systems design: PV recycling case. Industrial Ecology and System Thinking, ISIE, June 25, in Ulsan, Korea.

Contract, grant and sponsored research

Choi, J.-K. (Principal). Design for environment: Using sustainable minds cloud based life cycle assessment software for crown equipment, CROWN Equipment Corporation, $3,000.00. (December 20, 2013 - April 30, 2014).

Choi, J.-K. (Principal). Modeling for optimized photovoltaic recycling systems in the United States, University of Dayton Research Council, University of Dayton, $6,500.00. (June 10, 2013 - August 25, 2013).

Choi, J.-K. (Supporting), and J.K. Kissock (Principal). University of Dayton Industrial Assessment Center, U.S. Department of Energy, Federal, $1,300,000.00. (October 2011 - September 2017).

Back to top from Choi, Jun-Ki

Ervin, Jamie S.

Journal articles

Hanchak, M.S., A.M. Briones, J.S. Ervin, L.W. Byrd, and S. Putnam. 2013. One-dimensional models of nanoliter droplet evaporation from a hot surface in the transition regime. Iinternational Journal of Heat and Mass Transfer.

Hanchak, M.S., M.D. Vangsness, L.W. Byrd, J.S. Ervin, and J.G. Jones. 2013. Profile measurements of thin liquid films using reflectometry. Applied Physics Letters 103: 211607.

Jiang, H., J.S. Ervin, S.S. Zabarnick, and Z. West. 2013. Studies of turbulent flow, heat transfer deterioration and thermal oxidation of jet fuel under conditions of high heat flux and flow velocity. AIAA J. Thermophysics and Heat Transfer 27: 668-678.

Presentations

Hanchak, M.S. (Presenter & Author), M.D. Vangsness (Author Only), N. Gheorghiu (Author Only), J.S. Ervin (Author Only), L.W. Byrd (Author Only), and J. Jones (Author Only). 2013. Thin film evaporation model with retarded van der Waals’ interaction. IMECE 2013, ASME, November, in San Diego, California.

Puntel, A. (Author Only), S.M. Emo, T. Michalak (Author Only), J.S. Ervin, L. Byrd, V. Tsao, and T. Reitz. 2013. Refrigerant charge management and control for next-generation aircraft vapor compression systems. SAE Power Systems Conference, SAE, September, in Montreal, Canada.

Contract, grant and sponsored research

Chiasson, A., M. Elsass, J.S. Ervin (Principal), D. Johnson, and S. Zabarnick. Fuel tank heat transfer for jet a freeze point studies, Air Force/ NAVAIR / Defense Logistics Agency, Federal, $1,800,000.00. (October 2010 - May 2014).

Cole, A., J. Cory, B. Cranston, S. Emo, J.S. Ervin (Principal), M. Hanchak, D. Johnson, W. Melke, and V. Tsao. Aircraft thermal management research, Air Force Research Laboratory, Federal, $5,500,000.00. (May 2008 - November 2013).

Ballal, D.L. (Principal), M.J. DeWitt (Co-Principal), J.S. Ervin (Co-Principal), S.D. Stouffer (Co-Principal), T.F. Williams (Co-Principal), and S. Zabarnick (Co-Principal).FA8650-10-2-2934; Fuels and combustion technologies for aerospace propulsion, Air Force Research Laboratories, Federal, $49,500,000.00. (December 2010 - December 2016).

Tsao, B.-H. (Principal), J. Cory (Thermal Management), S.M. Emo (Thermal Management), J.S. Ervin (Thermal Management), M. Hanchak(Thermal Management), D.J. Johnson (Thermal Management), and V. Tsao (Thermal Management).Research and development in advanced power and thermal management technologies for advanced aircraft, Air Force Research Laboratory, Federal, $7,400,000.00. (September 2012 - October 2014).

Back to top from Ervin, Jamie S.

Hallinan, Kevin P.

Paper published in conference proceedings

Choi, J.-K., J.K. Kissock, and K.P. Hallinan. 2013. Beyond industrial energy assessments: The life cycle design perspective. ACEEE Summer Study on Energy Efficiency in Industry, 4-1 to 4-11, in Niagara Falls, New York.

Schubert, T., and K.P. Hallinan. 2013. Improving the efficiency of Stirling engines for use in distributed electricity, heating, and cooling. ASME 7th International Conference on Energy Sustainability, ESFuelCell2013-18093, in Minneapolis, Minnesota.

Presentation

Alshatshati, S. (Presenter & Author), and K.P. Hallinan (Author Only). 2013. At-scale prediction of building r-value and mass density from potentially aerial thermal image. DESS 2013, Dayton Engineering Sciences Symposium, October 30, in Dayton Ohio.

Poster

Raziei, A. (Presenter & Author), K.P. Hallinan (Author Only), and R.J. Brecha (Author Only). 2013. Energy cost optimization for system with both solar energy and conventional energy production and energy storage, and real time pricing. DESS 2013, Dayton Engineering Sciences Symposium, October 30, in Dayton Ohio.

Contract, grant and sponsored research

Hallinan, K.P. (Principal), and R.J. Brecha (Co-Principal). Commercial building recommissioning program, Vectren, University of Dayton, $175,000.00. (August 2009 - December 2013).

Hallinan, K.P. (Principal). Novel Carnot like Stirling solar engine, AFRL-Propulsion Directorate, Federal, $25,000.00. (June 1, 2012 - May 15, 2013).

Back to top from Hallinan, Kevin P.

Kashani, A. Reza

Contract, grant and sponsored research

Kashani, A.R., J. Deng (Supporting), and T. Chen (Supporting). Rear axle whine noise abatement, Chrysler Corp, Private, $170,000.00. (May 1, 2013 - June 1, 2014).

Kashani, A.R., and J. Monfort (Supporting). Acoustics of augmentor, Air Force (funding a graduate student, Jeff Monfort), Federal, $70,000.00. (May 1, 2012 - May 1, 2014).

Back to top from Kashani, A. Reza

Kissock, John Kelly

Professional Development Seminars

Kissock, J.K. 2013. Energy efficient compressed air and process cooling. Triple Point Energy, July 9 and November 8, in Columbus, Ohio.

Kissock, J.K. 2013. Energy efficient manufacturing. University of Dayton China Institute, October 13-15, in Suzhou, China.

Refereed Journals

Mohammed, A.Q., T. Wenning, F. Sever, and K. Kissock. 2013. Energy efficient operation of ammonia refrigeration systems. ASHRAE Transactions, DE-13-019.

Kissock, K., A. Selvacanabady, and N. Raghavan. 2013. Simplified model for ground heat transfer from slab-on-grade buildings. ASHRAE Transactions, DE-13-041.

Refereed Conference Proceedings

Choi, J., and K. Kissock. 2013. Beyond industrial energy assessments: The life cycle design perspective. ACEEE Summer Study on Energy in Industry, July 23-26, in Niagara Falls, New York.

Raffio, T., B. Abels, H. Zhang, and K. Kissock. 2013. Integrated systems plus principles approach and energy efficiency guidebook. ACEEE Summer Study on Energy in Industry, July 23-26, in Niagara Falls, New York.

Pohlman, D., J. Smith, J. Bu, and K. Kissock. 2013. Net-zero carbon manufacturing at net-zero cost. ACEEE Summer Study on Energy in Industry, July 23-26, in Niagara Falls, New York.

Mohammed, A.Q., T. Wenning, F. Sever, and K. Kissock. 2013. Energy efficient design retrofit and control of evaporative condensers in ammonia refrigeration systems. ACEEE Summer Study on Energy in Industry, July 23-26, in Niagara Falls, New York.

Nagabhairava, M., Y. Ma, and K. Kissock. 2013. Economic analysis of solar PV and batteries for common residential electricity rate structures using green button data. ES-FuelCell2013-18248, ASME 7th International Conference on Energy Sustainability, July 14-19, in Minneapolis, Minnesota.

Winter, B., L. Louco, K. Kissock, P. Mariadass, and M. Daniels. 2013. Design and construction of a solar thermal refrigeration system for Patna, India. ES-FuelCell2013-18243, ASME 7th International Conference on Energy Sustainability, July 14-19, in Minneapolis, Minnesota.

Invited Lectures

Kissock, K. 2013. Integrated systems plus principles approach to industrial energy efficiency. Honda Supplier Network, November 13, in Columbus, Ohio.

Kissock, K. 2013. Identifying and tracking building energy efficiency opportunities across your campus. Big Ten and Friends Mechanical and Energy Conference, October 1, in Columbus, Ohio.

Kissock, K. 2013. Portfolio energy management. Rocky Mountain Institute, June 24, in Boulder, Colorado.

Kissock, K. 2013. Guiding energy efficiency with inverse modeling. Energy Management Congress West, Association of Energy Engineers, June 19, in Las Vegas, Nevada.

Kissock, K. 2013. Integrated systems plus principles approach to industrial energy efficiency. Association of Energy Engineers, June 13, in Columbus, Ohio.

Kissock, K. 2013. Energy efficient HVAC in manufacturing plants. Ohio Energy Management Conference, February 19, in Columbus, Ohio.

Contract, Grant and Sponsored Research

Kissock, J.K. (Principal). Industrial assessments. University of Dayton Industrial Assessment Center, Sponsor: U.S. Department of Energy, UD-Contract KHN-022, $1,300,000.00. (October 2011 – September 2017).

Back to top from Kissock, John Kelly

Murray, Andrew P.

Journal articles

Shamsudin, S.A., and A.P. Murray. 2013. A closed-form solution for the similarity transformation parameters of two planar point sets. Journal of Mechanical Engineering and Technology 5, no. 1: 59-68.

Shamsudin, S.A., A.P. Murray, D.H. Myszka, and J.P. Schmiedeler. 2013. Kinematic synthesis of planar, shape-changing, rigid mechanisms for design profiles with significant differences in arc length. Machine and Mechanism Theory 70, no.12: 425-440.

Paper published in conference proceedings

Li, B., A.P. Murray, and D.H. Myszka. 2013. Improving techniques for center of mass estimation using statically equivalent serial chain modeling. 24th Canadian Congress of Applied Mechanics, in Saskatoon, Saskatchewan.

Lin, L., D.H. Myszka, and A.P. Murray. 2013. Using the singularity trace to understand linkage motion characteristics. International Design Engineering Conference, in Portland, Oregon.

Tong, Y., D.H. Myszka, and A.P. Murray. 2013. Four-bar linkage synthesis for a combination of motion and path-point generation. International Design Engineering Conference, in Portland, Oregon.

Invited lecture

Murray, A.P. (Presenter & Author). 2013. Everything I know about teaching. New Faculty Orientation, University of Dayton, August 16, in Dayton, Ohio.

Presentation

Almandeel, A. (Presenter & Author), A.P. Murray (Author Only), and D.H. Myszka (Author Only). 2013. Statically equivalent serial chain modeling with Kinect and Wii balance board. 9th Annual Dayton Engineering Sciences Symposium, ASME, Wright State University, October 29, in Dayton Ohio.

Giaier, K. (Presenter & Author), D.H. Myszka (Author Only), and A.P. Murray (Author Only). 2013. Variable geometry dies for polymer extrusion, Regional 9th Annual Dayton Engineering Sciences Symposium, ASME, Wright State University, October 29, in Dayton Ohio.

Joyce, P. (Presenter & Author), D.H. Myszka (Author Only), and A.P. Murray (Author Only). 2013. Development and design of an automotive mechanical spring starter. 9th Annual Dayton Engineering Sciences Symposium, ASME, Wright State University, October 29, in Dayton Ohio.

Li, B. (Presenter & Author), A.P. Murray (Author Only), D.H. Myszka (Author Only). 2013. Kinematic synthesis of planar, shape-changing rigid body mechanisms for design profiles with significant differences in arc length. 9th Annual Dayton Engineering Sciences Symposium, ASME, Wright State University, October 29, in Dayton Ohio.

Murray, A.P. (Presenter & Author), D.H. Myszka (Author Only), and L. Li (Author Only). 2013. Using the singularity trace to understand linkage motion characteristics. International Design Engineering Technical Conference, ASME, August 7, in Portland, Oregon.

Myszka, D.H. (Presenter & Author), Y. Tong (Author Only), and A.P. Murray (Author Only). 2013. Four-bar linkage synthesis for a combination of motion and path-point generation, International Design Engineering Technical Conference, ASME, August 7, in Portland, Oregon.

Nieman, J. (Presenter & Author), D.H. Myszka (Author Only), and A.P. Murray (Author Only). 2013. Design optimization and simulation of a spring based regenerative braking system. 9th Annual Dayton Engineering Sciences Symposium, ASME, Wright State University, October 29, in Dayton Ohio.

Poster

Almandeel, A. (Presenter & Author), A.P. Murray (Author Only), and D.H. Myszka (Author Only). 2013. Defect-free slider-crank function generation including position, velocity, and acceleration specification. Brother Joseph W. Stander Symposium, University of Dayton, April 17, in Dayton, Ohio.

Joyce, P. (Presenter & Author), D.H. Myszka (Author Only), and A.P. Murray (Author Only). 2013. The development of a spring powered starter for a motorcycle. Brother Joseph W. Stander Symposium, University of Dayton, April 17, in Dayton, Ohio.

Lauden, J. (Presenter & Author), D.H. Myszka (Author Only), and A.P. Murray (Author Only). 2013. Simulated performance analysis of novel automotive spring-starter designs using experimentally derived dynamic engine models. Brother Joseph W. Stander Symposium, University of Dayton, April 17, in Dayton, Ohio.

Li, B. (Presenter & Author), A.P. Murray (Author Only), and D.H. Myszka (Author Only). 2013. Improving the techniques for center of mass estimation using statically equivalent serial chain modeling. Brother Joseph W. Stander Symposium, University of Dayton, April 17, in Dayton, Ohio.

Li, L. (Presenter & Author), D.H. Myszka (Author Only), and A.P. Murray (Author Only). 2013. Analysis and design of reconfigurable linkages for industrial tasks. Brother Joseph W. Stander Symposium, University of Dayton, April 17, in Dayton, Ohio.

Nieman, J. (Presenter & Author), D.H. Myszka (Author Only), and A.P. Murray (Author Only). 2013. Design and prototyping of a 3D shape changing mechanism. Brother Joseph W. Stander Symposium, University of Dayton, April 17, in Dayton, Ohio.

Tong, Y. (Presenter & Author), A.P. Murray (Author Only), and D.H. Myszka (Author Only). 2013. Four-bar linkage synthesis for a combination of motion and path-point generation. Brother Joseph W. Stander Symposium, University of Dayton, April 17, in Dayton, Ohio.

Contract, grant and sponsored research

Murray, A.P. (Principal), and D.H. Myszka (Co-Principal). Variable geometry dies for polymer extrusion. National Science Foundation, Federal, $313,830.00. (August 1, 2012 - July 31, 2015).

Murray, A.P., and D.H. Myszka. Novel concepts for spring-based mechanical energy storage in motor vehicles. General Motors Global Research and Development, Private, $140,000.00. (August 1, 2010 - December 31, 2013).

Murray, A.P. (Principal), and D.H. Myszka (Co-Principal). Variable geometry dies for polymer extrusion - research experiences for undergraduate supplement. National Science Foundation, Federal, $11, 200.00. (May 1, 2013 - August 16, 2013).

Back to top from Murray, Andrew P.

Myszka, David H.

 Journal article

Shamsudin, S.A., A.P. Murray, D.H. Myszka, and J.P. Schmiedeler. 2013. Kinematic synthesis of planar, shape-changing, rigid mechanisms for design profiles with significant differences in arc length. Machine and Mechanism Theory 70, no. 12 (September 6): 425-440. http://www.deepdyve.com/lp/elsevier/kinematic-synthesis-of-planar-shape-changing-rigid-body-mechanisms-for-MsEM5jF4mL.

Paper published in conference proceedings

Li, B., A.P. Murray, and D.H. Myszka. 2013. Improving techniques for center of mass estimation using statically equivalent serial chain modeling. 24th Canadian Congress of Applied Mechanics, in Saskatoon, Saskatchewan.

Lin, L., D.H. Myszka, and A.P. Murray. 2013. Using the singularity trace to understand linkage motion characteristics. International Design Engineering Conference, in Portland, Oregon.

Tong, Y., D.H. Myszka, and A.P. Murray. 2013. Four-bar linkage synthesis for a combination of motion and path-point generation. International Design Engineering Conference, in Portland, Oregon.

PRESENTATION

Almandeel, A. (Presenter & Author), A.P. Murray (Author Only), and D.H. Myszka (Author Only). 2013. Statically equivalent serial chain modeling with Kinect and Wii balance board. 9th Annual Dayton Engineering Sciences Symposium, ASME, Wright State University, October 29, in Dayton Ohio.

Giaier, K. (Presenter & Author), D.H. Myszka (Author Only), and A.P. Murray (Author Only). 2013. Variable geometry dies for polymer extrusion, Regional 9th Annual Dayton Engineering Sciences Symposium, ASME, Wright State University, October 29, in Dayton Ohio.

Joyce, P. (Presenter & Author), D.H. Myszka (Author Only), and A.P. Murray (Author Only). 2013. Development and design of an automotive mechanical spring starter. 9th Annual Dayton Engineering Sciences Symposium, ASME, Wright State University, October 29, in Dayton Ohio.

Li, B. (Presenter & Author), A.P. Murray (Author Only), D.H. Myszka (Author Only). 2013. Kinematic synthesis of planar, shape-changing rigid body mechanisms for design profiles with significant differences in arc length. 9th Annual Dayton Engineering Sciences Symposium, ASME, Wright State University, October 29, in Dayton Ohio.

Nieman, J. (Presenter & Author), D.H. Myszka (Author Only), and A.P. Murray (Author Only). 2013. Design optimization and simulation of a spring based regenerative braking system. 9th Annual Dayton Engineering Sciences Symposium, ASME, Wright State University, October 29, in Dayton Ohio.

POSTER

Almandeel, A. (Presenter & Author), A.P. Murray (Author Only), and D.H. Myszka (Author Only). 2013. Defect-free slider-crank function generation including position, velocity, and acceleration specification. Brother Joseph W. Stander Symposium, University of Dayton, April 17, in Dayton, Ohio.

Joyce, P. (Presenter & Author), D.H. Myszka (Author Only), and A.P. Murray (Author Only). 2013. The development of a spring powered starter for a motorcycle. Brother Joseph W. Stander Symposium, University of Dayton, April 17, in Dayton, Ohio.

Lauden, J. (Presenter & Author), D.H. Myszka (Author Only), and A.P. Murray (Author Only). 2013. Simulated performance analysis of novel automotive spring-starter designs using experimentally derived dynamic engine models. Brother Joseph W. Stander Symposium, University of Dayton, April 17, in Dayton, Ohio.

Li, B. (Presenter & Author), A.P. Murray (Author Only), and D.H. Myszka (Author Only). 2013. Improving the techniques for center of mass estimation using statically equivalent serial chain modeling. Brother Joseph W. Stander Symposium, University of Dayton, April 17, in Dayton, Ohio.

Li, L. (Presenter & Author), D.H. Myszka (Author Only), and A.P. Murray (Author Only). 2013. Analysis and design of reconfigurable linkages for industrial tasks. Brother Joseph W. Stander Symposium, University of Dayton, April 17, in Dayton, Ohio.

Nieman, J. (Presenter & Author), D.H. Myszka (Author Only), and A.P. Murray (Author Only). 2013. Design and prototyping of a 3D shape changing mechanism. Brother Joseph W. Stander Symposium, University of Dayton, April 17, in Dayton, Ohio.

Tong, Y. (Presenter & Author), A.P. Murray (Author Only), and D.H. Myszka (Author Only). 2013. Four-bar linkage synthesis for a combination of motion and path-point generation. Brother Joseph W. Stander Symposium, University of Dayton, April 17, in Dayton, Ohio.

CONTRACT, GRANT AND SPONSORED RESEARCH

Murray, A.P. (Principal), and D.H. Myszka (Co-Principal). Variable geometry dies for polymer extrusion. National Science Foundation, Federal, $313,830.00. (August 1, 2012 - July 31, 2015).

Murray, A.P., and D.H. Myszka. Novel concepts for spring-based mechanical energy storage in motor vehicles. General Motors Global Research and Development, Private, $140,000.00. (August 1, 2010 - December 31, 2013).

Murray, A.P. (Principal), and D.H. Myszka (Co-Principal). Variable geometry dies for polymer extrusion - research experiences for undergraduate supplement. National Science Foundation, Federal, $11, 200.00. (May 1, 2013 - August 16, 2013).

Back to top from Myszka, David H.

Petrykowski, John C.

Paper published at conference proceedings

Petrykowski, J.C., and Y. Shi. 2013. Analysis of the effectiveness of electromagnetic acoustic transduction in containerless processing operations. 2013 International Mechanical Engineering Conference and Exposition, San Diego, California.

Petrykowski, J.C., A.L. Wright, and Y. Shi. 2013. Nucleate boiling theory for gaging fuel coolant interaction potential associated with LMR source term experiments. NURETH 15 Nuclear Reactor Thermal Hydraulics, in Pisa, Italy.

Invited lecture

Petrykowski, J.C. (Presenter & Author). 2013. Nucleate boiling corrections applied to severe accident safety experiments. Oak Ridge National Laboratory, December 10, in Oak Ridge, Tennessee.

Petrykowski, J.C. 2013. Electromagnetic processing of liquids. Oak Ridge National Laboratory, December 9, in Oak Ridge, Tennessee.

Presentations

Petrykowski, J.C. 2013. Nucleate boiling theory for gaging fuel coolant interaction potential associated with LMR source term experiments. 15th International Topical Meeting on Nuclear Reactor Thermal Hydraulics, International Atomic Energy Agency, American Nuclear Society, May, in Pisa, Italy.

Petrykowski, J.C. (Author Only), Y.S. (Presenter & Author). 2013. Analysis of the effectiveness of electromagnetic acoustic transduction in containerless processing operations. International Mechanical Engineering Conference and Exposition, November 15-21, in San Diego, California.

Back to top from Petrykowski, John C.

Pinnell, Margaret F.

Journal article

Pinnell, M.F., J. Rowley, S. Preiss, S. Franco, R.P. Blust, and R. Beach. 2013. Bridging the gap between engineering design and PK-12 curriculum development through the use the STEM education quality framework. Journal of STEM Education 14, no. 4: 29-35. http://ojs.jstem.org/index.php?journal=JSTEM&page=issue&op=view&path%5B%5D=122

Paper published in conference proceedings

Pinnell, M.F., S. Franco, S. Preiss, R.P. Blust, and R. Beach. 2013. Engaging K-12 teachers in engineering innovation and design: Lessons learned from a pilot NSF research experience for teachers program. ASEE Annual Conference and Exposition and ASEE North Central Section Conference.

Pinnell, M.F., S. Franco, S. Preiss, R.P. Blust, J. Rowley, and R. Beach. 2013. Innovating education for the next generation of engineers - results of an NSF-RET program focused on innovation. 2013 ASEE Annual International Conference and Exposition.

Workshop

Pinnell, M.F. (Co-Presenter), S. Preiss (Co-Presenter), and K.J. Brown (Co-Presenter). 2013. Engineering a ball launcher. STEM Think Tank and Conference–Changing the Paradigm, July, in Nashville, Tennessee.

Pinnell, M.F. (Co-Presenter), S. Preiss (Co-Presenter), and K.J. Brown (Co-Presenter). 2013. Getting started in STEM. STEM Think Tank and Conference–Changing the Paradigm, July, in Nashville, Tennessee.

Back to top from Pinnell, Margaret F.

Rumpfkeil, Markus Peer

Journal article

Rumpfkeil, M. 2013. Robust design under mixed aleatory/epistemic uncertainties using gradients and surrogates. Journal of Uncertainty Analysis and Applications 1, no. 7. doi:10.1186/2195-5468-1-7.

Rumpfkeil, M. 2013. Optimizations under uncertainty using gradients, Hessians, and surrogate models. AIAA Journal 51, no. 2: 444-451.

Papers published in conference proceeding

Boopathy, K., and M. Rumpfkeil. 2013. A multivariate interpolation and regression enhanced Kriging surrogate model. AIAA.

Boopathy, K., and M. Rumpfkeil. 2013. Building aerodynamic databases using enhanced Kriging surrogate models. AIAA Regional Conference, in Chicago, Illinois.

Kudla, T., and M. Rumpfkeil. 2013. Implementation and validation of a modified nonequilibrium Wilcox k-omega turbulence model. AIAA Regional Conference, in Chicago, Illinois.

Rumpfkeil, M. 2013. Optimization under mixed aleatory/epistemic uncertainty using derivatives. AIAA 2013-1754.

Rumpfkeil, M., M. Turner, R. Roberts, J. Van Kuren, T. Smith, and J. Bons. 2013. Thrust vectoring design project at six universities part II: Impact on student learning and lessons learned. ASME GT2013-95631 ed.

Turner, M., M. Rumpfkeil, R. Roberts, J. Van Kuren, T. Smith, and J. Bons. 2013. Thrust vectoring design project at six universities part I: Project description and final designs. ASME GT2013-95602 ed.

Invited lecture

Rumpfkeil, M. (Presenter Only). 2013. Surrogate models, uncertainty quantification, and optimization under uncertainty research seminar. University of British Columbia, August 7, in Vancouver, Canada.

Presentation

Rumpfkeil, M. (Presenter & Author). 2013. Optimization under mixed aleatory/epistemic uncertainty. 38th AIAA Dayton / Cincinnati Aerospace Sciences Symposium (DCASS), March 6, in Dayton, Ohio.

Rumpfkeil, M. (Author Only), and K. Boopathy (Presenter & Author). 2013. A multivariate interpolation and regression enhanced Kriging surrogate model. 38th AIAA Dayton / Cincinnati Aerospace Sciences Symposium (DCASS), March 6, in Dayton, Ohio.

Rumpfkeil, M. (Author Only), and T. Kudla (Presenter & Author). 2013. Initial implementation and validation of a modified nonequilibrium Wilcox komega turbulence model. 38th AIAA Dayton / Cincinnati Aerospace Sciences Symposium (DCASS), March 6, Dayton, Ohio.

Rumpfkeil, M. (Author Only), and J. Roland (Presenter & Author). 2013. Analysis of a wing fuel tank energy model to determine heat sink possibilities. 38th AIAA Dayton / Cincinnati Aerospace Sciences Symposium (DCASS), March 6, Dayton, Ohio.

Contract, grant and sponsored research

Rumpfkeil, M. (Principal). DaVinci project (extension), AFOSR, Federal, $16,946.00. (November 1, 2013 - April 30, 2014).

Rumpfkeil, M. (Principal). AFRL subject matter expert, AFOSR, Federal, $77,933.00. (May 1, 2013 - April 7, 2014).

Rumpfkeil, M. (Principal). DaVinci project, AFOSR, Federal, $51,300.00. (November 1, 2012 - October 31, 2013).

Rumpfkeil, M. (Principal). AFRL subject matter expert, AFOSR, Federal, $28,363.00. (August 15, 2012 - May 1, 2013).

Rumpfkeil, M. (Principal). Aerospace propulsion outreach program (APOP) 2014, AFRL/RZ, Federal, $12,000.00. (August 1, 2013 - May 31, 2014).

Rumpfkeil, M. (Principal). Research council seed grant, University of Dayton, $5,000.00. (May 1, 2013 - July 31, 2013).

Rumpfkeil, M. (Principal). Aerospace propulsion outreach program (APOP) 2013, AFRL/RZ, Federal, $14,500.00. (August 1, 2012 - May 31, 2013).

Back to top from Rumpfkeil, Markus Peer